With plastic bag and wooden case.

More than 5 years.

The material for cold forming is SPHC, St12 for high quality. The material for aluminium control arm is 6061-T6.

If we have inventory, one week is enough. If no, it is usually 45 days for production.

More than 300 items,including European car, American car,Japanese car, Korea car and so on.

With normal natural carton and pallet.

Abt. 2 or 3 years.

No, we cannot. Only 14 ~ 42mm diameter we can do.

1F. Raise the front end of the vehicle either by using a lift or using a floor jack. Use jack stands to secure the vehicle if you are using a floor jack. Drive-on floor ramps may also be used. This installation will depict using an alignment rack. It is not required to droop the suspension for the front bar installation. 2F. Remove the two engine under covers. The silver aluminum cover is held i...

Reduces body rollBetter vehicle controlImproves cornering tractionDistributes weight evenlyStabilizes towing sway

Plastic bag and Netural case. Of course , if customer have special design, we also allow.

There are many reasons, however the prime reason a bar is fitted is to maintain maximum tyre contact with the road. Suspension systems are designed to vary the angle of the wheel and contact patch as a vehicle travels along the road. The optimum contact patch is achieved with the wheel in the vertical position. Braking, body roll, body yaw, squat and dive all cause the shift in contact patch.

Dragon Boat Festival, also known as Duanwu Festival, is a traditional and important celebration in China.In 2021, Dragon Boat Festival falls on June 14 (Monday). China will have 3 days of public holiday from Saturday (June 12) to Monday (June 14), and we will be back at work on Tuesday, June 15.Facts to Understand Dragon Boat FestivalChinese name: 端午节 Duānwǔ Jié /dwann-woo jyeah/ 'start [of the] f...

Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are:clunking noise,rattling noise,knocking uneven noise road,lack of stability when driving and noise going over speed bumps.poor handling during turns.

1111111111111111111111111111

Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are:clunking noise,rattling noise,knocking uneven noise road,lack of stability when driving and noise going over speed bumps.poor handling during turns.

Because a sway bar helps the car's suspension to put more pressure on loaded springs, a broken sway bar means that the car's suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds.

Following the law of inertia, an object in motion wants to stay in motion unless acted upon by an outside force. In this case, the outside force to your vehicle is a change direction. As the mass of your vehicle corners, its inertia is causing the car to "roll" to the outside of the turn. This rolling affect causes the car to become unbalanced and "unplanted." The purpose of the sway bar is reduce...

There are many reasons to upgrade your factory bar depending on the application. If it is a truck or SUV, it can be made to handle like a passenger car by offering flatter cornering and quicker response. If it is a large passenger car, it can be made to handle like a sports car for the same reasons and it adds more stability on the highway at speed, especially when those big trucks go by. Final...

Sometimes slight changes in bar design are made, with the respect to the OEM version, due to differences in tooling or to accommodate common changes people make to their vehicles in the aftermarket such as lowering or lifting.

There is definitely a point of diminishing returns. If the bar rate is too great it can adversely affect the ride quality by coupling both wheels on the same axle over bumps causing independent suspension to behave like a solid axle.

The most important thing is to ensure is that your wheels are not hanging. The suspension should be compressed so the control arms, etc. are at the same position they would be if the vehicle were sitting at ride height. This can be done by using ramps, a drive on lift, or simply loading the wheels if the vehicle is on jack stands or a two point lift. If this is not done the arc that the bar and...